Press Releases

Toshiba and SanDisk Announce Novel NAND Cell Architecture Enabling Major Advances In Flash Memory Capacity

2003年 6月 11日

New Memory Cell Structure Opens Way To 90-nanometer
And Future Generations of NAND Flash Memory

TOKYO, June 11, 2003-Toshiba Corporation and SanDisk Corporation (NASDAQ:SNDK) today announced development of a high density NAND flash memory cell structure that allows fabrication of 4-Gigabit (Gb) NAND flash memory using the 90-nanometer (nm) design rules. The new memory cell, has a physical cell area of only 0.041 micron squared, and supports scaling to future generations of smaller feature design rules.

Toshiba and SanDisk have tested the new cell structure and demonstrated its performance and reliability. The two companies plan to employ the new NAND cell technology starting in the first half of 2004 with 2-Gigabit and 4-Gigabit NAND flash memory chips that will be manufactured by their FlashVision Japan Joint Venture production facility located at Toshiba's Yokkaichi Operations in Japan. Details of the high density NAND flash memory cell structure were presented at the VLSI Symposium in Kyoto, Japan, on June 11.

Toshiba and SanDisk are recognized technology innovators and market leaders in NAND flash memories-the highly versatile, non-volatile memory that continues to be designed into a diverse range of products, including digital still and video cameras, mobile phones and PDAs. Toshiba, a principal inventor of NAND flash memory, has consistently led the way in promoting advances in chip capacity, while SanDisk is a leader in flash data storage card products and a pioneer in high density flash MLC memory technology.

In the new NAND memory cell structure, the floating gate is completely self-aligned to the active area. This design characteristic supports scaling of the structure for fabrication beyond the 90nm design rule and is expected to provide a distinct advantage over the current NAND memory cell structure, where further scaling below 110 nanometers becomes difficult.

The new memory cell structure is designed to support both 2-Gigabit single-level cells (SLC) with an area per bit of 0.041 micron squared as well as 4-Gigabit multi-level cells (MLC), which effectively will have an area per bit of only 0.0205 micron square. The MLC structure allows each memory cell to carry 2 bits of information, instead of 1 bit, and minimizes interference. The larger capacity and low bit cost of MLC will allow Toshiba and SanDisk to reinforce their market leadership and advance their continuing collaboration in new technologies to meet increasing market demands for flash memory.

About Toshiba Corporation
Toshiba Corporation is a leader in the development and manufacture of electronic devices and components, information and communication systems, consumer products and power systems. The company's ability to integrate wide-ranging capabilities, from hardware to software and innovative services, assure its position as an innovator in diverse fields and many businesses. In semiconductors, Toshiba continues to build on its world-class position in NAND flash memories, analog devices and discrete devices and to promote its leadership in the fast growing system-on-chip market. Toshiba has approximately 166,000 employees worldwide and annual sales of over US$47 billion.

About SanDisk Corporation
SanDisk Corporation is the world's largest supplier of flash data storage card products. The company, located in Sunnyvale CA, designs and manufactures solid-state data, digital imaging and audio storage products using its patented high density flash memory and controller technology.

This news release contains certain forward-looking statements including our expectations for timing of new product introductions and the manufacturability and scalability of the newly announced cell structure. These statements involve numerous risks and uncertainties that may cause these forward looking statements to be inaccurate, including among others, the risk that 90 nm NAND technology and the new cell structure may not enter production as planned due to unpredicted delays associated with preparing this technology for volume manufacturing, the risk that 2Gbit and 4Gbit chips employing this new technology may not achieve sufficiently high yields and adequate performance to be competitive and other risks detailed from time to time in our Securities and Exchange Commission filings and reports, including, but not limited to, Form 10Q for the quarter ended March 31, 2003 and our Annual Report on Form 10-K for the year ended December 31, 2002. Future results may differ materially from the projections contained in this release.

SanDisk assumes no obligation to update the information contained in this release. SanDisk's web site/home page address:

All trade names are either registered trademarks or trademarks of their respective holders.
Contact Information:
SanDisk Corporation

Mike Wong
Tel: 408-548-0223
Toshiba Corporation

Makoto Yasuda
Tel: 81-3-3457-2105


SanDisk 媒體聯絡人